 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?
I am trying to replace a Bryant 34427dp120 thermostat with an Edge Pro 33cs thermostat. The Bryant thermostat has wires labeled - going clockwise at top - G, Y, W1, E, W2, F, O, R, T. The Edge Pro has Rc, Rh, W/W1, G, Y/Y2, C, O/W2/B, Y1. I can correspond Y, W1, O, R but am at a loss how to...
I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be
I need to replace a Honeywell T841A1001 thermostat on a heat pump, and of course they do not make this one anymore. The old thermostat wiring was as follows" R = Red O = Orange G = Green Y = Yellow W2 = White with Jumper to X
We recently bought a Honeywell RTH7400 for our home with a Goodman cple30-1 Heat pump and a Janitrol Gas furnace. I hooked it up according to the Honeywell instructions. C to C G to G Y to Y O to O/B R to RC with jumper to R W2 to Aux with jumper to E I set it to 7 on function 170...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
