Ask Experts Questions for FREE Help !
Ask
    shednearl's Avatar
    shednearl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2014, 07:36 AM
    Old freezer model #106.629440. How do you pull the door, wires through hinge?
    Old freezer model #106.629440 was just given to us. Need to pull the door to move. How, with wires through the bottom hinge?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 28, 2014, 03:56 AM
    You will have to take off inner lining of door to get to the wires and then seal it back up with GE Clear Silicone caulk when you put it back. Why do you need to pull the door? On newer refrigerators with no latch there is no safety reason to pull these doors.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a kenmore refrigerator freezer model 106.8609982 when was this manufactured? [ 2 Answers ]

My ge nauti dishwasher model #gsc3200J01ww is leaking fr right side where door hinge [ 0 Answers ]

Is when rinse cycle starts

Kenmore 106.56926600 Freezer Adjust won't go lower [ 0 Answers ]

Kenmore Side by Side Refrigerator/Freezer My freezer compartment is icing up (thinking: too cold, so defrost interval can't defrost enough during cycle... result: frost and ice build-up). I tried to adjust the freezer temp lower (higher temp), but the slide control only adjusts two...

Kenmore coldspot 106, top freezer [ 1 Answers ]

My Kenmore Coldspot 106 top freezer/refrigerator not longer cools as before. My freezer is not as cold and the refrigerator nothing. I have defrosted and cleaned. The shelf between the freezer and refrigerator is somewhat warm. Not sure what else to do?

Adjusting tension in a door hinge. [ 1 Answers ]

How do you adjust the tension in the door hinges on the door going from the house into the garage?

View more questions Search