Ask Experts Questions for FREE Help !
Ask
    thebuff's Avatar
    thebuff Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2014, 01:47 PM
    3 speed control switch
    Fan has a 3 speed control switch, the 4 wires are black,purple brown and green, am sure black goes to L but what is the numbers for remaining wires. Thought I could remember what went where but not so. Thanks for any help you can give me
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 17, 2014, 02:33 PM
    You will have to test them as there is no standard. They go left or right (high to low) from black.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert remote fan control to 3 speed switch [ 0 Answers ]

Casa vieja fan remote controlled.want to convert it to 3 speed switch.fan is about 10 yrs old.4 wires coming from fan winding,yellow,purple,red and brown.Can only get ohms readings across yellow to red and purple to brown.Brown and red connect to start capactor. After trying all combinations,could...

Speed control switch [ 1 Answers ]

I installed a speed control switch in my ceiling fan. Now when I pull on the light switch chain when the lights turn off so does the fan. Why is this

8 wire ceiling fan speed control switch [ 1 Answers ]

I am trying to wire an 8 wire ( 2 level 4 position) fan speed control switch; I have 3 wires from fan motor (2 hot end of coils 1 neutral), Power and Neutral, and a 3 wire cap. Need wireing dia.

Replacing speed control switch on ceiling fans [ 1 Answers ]

Hello, I have just replaced a speed control switch on my ceiling fan and now it doesn't work at all.The kight works but the fan makes a humming sound when I try to turn on the fan.I did switch the (4)wires one at a time so I didn't mix the wires up. Please Help!

Ceiling fan 3 speed control switch. [ 7 Answers ]

I have a Moss Hi Line model HFL ceiling fan. It was purchased 1983. The pull switch went bad and someone else disassembled it leaving no diagrams. It has a 3 speed two layer pull switch and a 5 wire capacitor. The capacitor is Shizuki.d306 with markings 1.25 - 4.75 - 4.75 - 8.00. Does anyone have...

View more questions Search