Ask Experts Questions for FREE Help !
Ask
    GailSales's Avatar
    GailSales Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2014, 01:53 PM
    Halogen light fixture
    Bulb burned out in pendant light -- removed bulb and tried to insert replacement -- prongs would not fit in -- tried to reinsert the old bulb and that wouldn't go in either -- what could be wrong?

    Gail
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 9, 2014, 02:07 PM
    The G8 20watt Halogens are a real pain to replace. Due to the heat, the pin bases oxidize and it is very hard to replace. You might be able to use some dielectric grease on the pins, very, very light coat. Do not handle the bulb or get grease on the bulb.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Halogen light fixture troubleshooting [ 2 Answers ]

I have a halogen ceiling light fixture, which over time began lighting only after a delay of several seconds - sometimes it took up to a minute for the light to come on, but it always would come on eventually. Thinking the problem might be a defective bulb, I replaced the bulb with a new one...

Halogen Light Fixture Burns Out [ 2 Answers ]

I live in a condo, and have a halogen light fixture in our living room. The light fixture has worked for years, and then about a month ago it stopped working. I thought it was just an old fixture, so I replaced it with a new halogen fixture. The new fixture worked for about a week, and now has...

I keep replacing the halogen bulb in my light fixture once a week? [ 2 Answers ]

I use 0ne 150 watt bulb as light fixture says per week can not find out why they go so soon

Halogen overhead light fixture got wet [ 0 Answers ]

Over head halogen light fixture had water come out when the glass shade was removed. Not sure if the leak was from the roof. What else might cause it? The light fixture was still working but is it safe or should it be replaced?

How to reassemble halogen light fixture [ 1 Answers ]

I have replaced the bulb in my halogen ceiling light fixture but cannot get the assembly back in it's housing. This is the first time I have replaced the bulb. I saw a similar inquiry on this site but have been unable to find thr answer

View more questions Search