 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to reassemble halogen light fixture
I have replaced the bulb in my halogen ceiling light fixture but cannot get the assembly back in it's housing. This is the first time I have replaced the bulb. I saw a similar inquiry on this site but have been unable to find thr answer
|
||||
|
||||
|
Hi, johnmlane! If you type a keyword or words into the search function at the top of this page, you might find the question that your looking for. There's also questions that have been similar to yours on the bottom of this page and maybe one of them is the one. Thanks! |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am remodeling my bathroom and am having trouble with the wiring of the switches. Existing wiring controlled an fan switch, separate switch for the light, a switch for vanity light and an outlet. I want to eliminate the outlet so need to wire the three switches separely in a 3 gang box. The wiring...
OK -i have a problem.. I have a electrical box with 2 single pole(I believe)switches with one switch(left )has two black wires and a ground which I'm not sure what it controls what outlet in the room and the next switch(single pole?)with a red wire and black wire(hot?)going into the switch.Both...
Today I tried to replace a ceiling fan to a light fixture. I connected the black to black white to white and copper to ground. I have a red wire that I don't know what goes to. The light now will not turn off. Should the red wire be connected to something?
I added a third light (one that had been sitting in my closet for years) to one of my tracks which immediately blew the bulbs in the other two lights. Thinking the light to be defective, or perhaps the limit on the track to be 2 not 3, I removed it and replaced the bulbs in the other two lights....
View more questions Search
|
