 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Does a remote controlled fan could be converted on manual?
I have a remoted control # AC-552"NN" and does not work, I want to converted on manual... this only works on high speed and there is no way to reduce the speed.
I found a part 705 IRME-02 0203 but I do not know if I replace it ,would work, and I need the price for this part. Thanks |
||||
Check out some similar questions!
I have a Hampton Bay fan w/ lights and an aftermarket remote. Remote battery was replaced and now we rarely get high speed to work. Occasionally it will switch to hi but mostly it runs slower than low at all times. If I connect it direct at the wall will I fry the fan & remote on the fan?...
We have two lights on a two way switch. We removed one and put a remote controlled fan. The fan worked separately only on the remote and the other light worked on the two way switches. We are replacing fan with a new one but hooked it up and it works with the remote only when the other light is on,...
The ceiling fan / light was working fine. It is a remote controlled unit. Turned of the fan and now neither the fan nor the light work. Other outlets work in the room. Help Help. Thanks.
We recently bought a new house. In the master bedroom is a remote controlled ceiling fan. This fan, as far as I am able to determine, works solely by the remote control. There is nothing hooked up to the wall switches and I can see no on/off switch. The problem now is that the remote is broken...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
