Led code red light continuously on for air replace filter

sweltering Posts: 1, Reputation: 1

New Member

May 31, 2014, 06:46 PM

Led code red light continuously on for air replace filter

The led light has no flash .interpretation says reads control has 24 volts batter

Check out some similar questions!

The filter red light will not go off on refrigerator after filter is replaced [ 2 Answers ]

Maytag plus filter warning light will not go off when filter is replaced

Xr90 trane continuously flashing LED and fan stays on continuously [ 0 Answers ]

I have a Trane XR90 (6.5 years old) and Honeywell controller. The circulation fan stays on no matter what the controller tells it to do. The LED is blinking continuously (appears to be a slow frequency). The only way I can get the fan to turn off is to kill power to the whole unit. Any clue as...

Payne furnace trouble code led continuously blinking [ 0 Answers ]

Started to cool off and finally had to turn on the heat. Our Payne system is only blowing out cold air. The trouble code LED is blinking continuously. The label on the side of the unit says that continuous blinking means "Line voltage polarity reversed". I haven't touched anything since the last...

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

Red Led Light [ 1 Answers ]

I Have Replaced My Thermostat on My Furance and the red led light stays on .THE wires are hooked up the right way.Any Ideas?

View more questions Search

Check out some similar questions!

Add your answer here.