Ask Experts Questions for FREE Help !
Ask
    verab's Avatar
    verab Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 15, 2010, 07:52 AM
    The filter red light will not go off on refrigerator after filter is replaced
    Maytag plus filter warning light will not go off when filter is replaced
    Angrycustomer's Avatar
    Angrycustomer Posts: 79, Reputation: -1
    Junior Member
    		  
    #2

    Jun 15, 2010, 01:24 PM

    Oh sugar, I think if that's the side by side you have to replace the board and power board on the dispenser. Before doing that though find the sequence for reseting the light. Could be 2 buttons together.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Feb 18, 2012, 07:39 AM
    I would not blindly replace any part without testing it first. Sounds like you just need to reset it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Refrigerator filter bypass [ 3 Answers ]

Thanks for the suggestion of replacing the filter with one mounted behink the refrigerator. The Frigidaire model which I have has a filter at the top right of the compartment which slides in and snaps into place. It is the "PureSource2" filter. Installing the filter opens the valves which permit...

I replaced the filter in my Janitrol heater, now the unit doesn't lite or go on. [ 5 Answers ]

I changed the filter in our Janitrol heater, now it won't light.

Refrigerator filter bypass [ 1 Answers ]

I have a Frigidaire refrigerator with the "Pure Source 2" water filter. With just two users, it seems to plug up about every 1-2 months. Is there a bypass available that I can use to replace the filter? The changout is easy, but at over $30 each, I'm getting expensive water.

View more questions Search