Ask Experts Questions for FREE Help !
Ask
    FullerDerek86's Avatar
    FullerDerek86 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 26, 2014, 02:58 PM
    Globe Thermostat Model 59000
    Does my Globe Thermostat model 59000 have an option for cool. We moved into a house with central air and I can't seem to find a way to switch it to cool. Only heat. It looks like they switched thermostats before they left judging by the paint so it makes think this one doesn't have capability.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 26, 2014, 06:16 PM
    What type of heating and cooling systems do you have? If you do not see a Heat-Off- Cool switch, it is heat only.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Upgrade 2 wire mercury w enersaver globe 59000 [ 1 Answers ]

Only 2 wires connected to current switch grey and white yet three wires present all have colored thread 1 white 1 red 1 either grey or blue tried all different ways only seem to get the pilot to light no burner or fan coming on

Globe thermostat [ 1 Answers ]

I have a globe 7 day programmable thermostat which I have had for approx 4 years. Now the time display keeps flashing as if there has been a power failure. I reset it and again a few hours later it is flashing again.

I need a globe for model 191-691 fan where can I find this Thanks Dan [ 1 Answers ]

Where can I get a globe for model 191-691 hampton bay fan

Globe enersaver thermostat 59010 [ 0 Answers ]

My old thermostat had only two wires and they have 24 volts AC to them. Iconnected them to C and R terminals and the display works fine but will not start the furnace. I then used a jumper wire from C to W1 which is the furnace and as soon as the furnace kicks on the display goes blank. Is there...

How to remove globe on Hampton Bay Model TP-48? [ 2 Answers ]

Need to replace bulb in light fixture on Hampton Bay Model TP-48, but can't figure out how to remove globe to get at bulb.

View more questions Search