Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wright-rodgers mercury themostat where does the piml, and yellow wire go?
[ 2 Answers ]
Where do the pink and yellow wires go?
Upgrade two wire thermostat to digital?
[ 3 Answers ]
I tried to change out the thermostat with the digital but, when I unhooked the red and white wire from the old themostat the blower comes on and does not shut off. I hooked the new thermostat up white wire to W and red to RH and it still would not shut off until I hooked the old themostat back up....
Globe enersaver thermostat 59010
[ 0 Answers ]
My old thermostat had only two wires and they have 24 volts AC to them. Iconnected them to C and R terminals and the display works fine but will not start the furnace. I then used a jumper wire from C to W1 which is the furnace and as soon as the furnace kicks on the display goes blank. Is there...
I have a honeywell mercury thermostat with a red and a blue wire only... I bought a ho
[ 0 Answers ]
The new thermostat has rh rc w y g for wiring options
2 wire service upgrade
[ 1 Answers ]
My cousin just bought a house built 1957 has 2 wire romex plastic sheathed(hot&neutral) no ground and a breaker panel type that I have never seen before so we were talking about replaceing panel setting up grounding system for future added circuits. He wants to replace a lot of receptacles that... View more questions Search
|