 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a armstrong natural gas furnace with ac and fans run continuously
The fan runs regardless of settings unless I trip breaker. I replaced control board and thermostat. A/C or heat does not come on. The a/c comes on if I press contactor down. What else should I check?
|
||||
Check out some similar questions!
Hello, I have a 21 y.o. Armstrong Ultra 80 II gas furnace in very good condition that recently has started behaving in a very puzzling manner. On start-up, the inducer motor will come on as usual, but as soon as the pilot gas valve clicks open and the spark igniter activates, the inducer motor...
I have an armstrong gas furnace running on propane. Occasionally when the burner ignites a flame will burn inside one or more of the burner tubes. Any ideas?
Is there a pilot light on model mmha-070aahr-01?
Hi, An old roommate rewired my furnace (DC90) so that when the power to the furnace is on the blower motor runs continuously whether thermostat is turned up or not. Any help is greatly appreciated. Mike
Folks, I've got a couple of question concerning a Goodman Furnace GPG13: 1. This furnace is rated at 138,000 BTU. My gas meter is a 2 pound system. The furnace is about 20 feet away from the meter. Currently I've got 1/2" pipe connected to it. Is this right? Or should I use 3/4" pipe? How do...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
