Ask Experts Questions for FREE Help !
Ask
    Hardlybill's Avatar
    Hardlybill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 17, 2014, 08:44 AM
    Where's the clutch interlock switch on my Craftsman tractor?
    I have a Craftsman 15HP 42” 6 Speed model 917.252520 tractor with Engine 28N707. Where's the clutch interlock switch?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    May 24, 2014, 06:26 AM
    Hi,
    Generally in the engine compartment and beneath the dash or under the running board. A few have been put inboard of the frame. Will not usually be shown in manual/parts breakdown.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 20.5hp 42in Lawn Tractor How to remove bottom interlock switch? [ 3 Answers ]

My tractor is a Model #917270860. I have replaced the seat interlock switch and the interlock switch behind dash (for the mower engagement lever) I need to know how to remove the second interlock switch which is being held in by the foot lever or brake some how and I can't get under the mower and...

Brake/clutch engine start interlock switch (limit switch per Murray) [ 0 Answers ]

I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...

How to replace interlock switch craftsman dyt 4000 [ 1 Answers ]

What is the procedure to replace the interlock switch on a Craftsman Riding Mower Model DYT 4000

Ford Truck Clutch Interlock Switch [ 2 Answers ]

On a 1987 Ford F-150 standard shift truck the clutch interlock switch is apparently used to simply close the circuit for the starter switch when the clutch is fully depressed - in order to prevent starting without depressing the clutch. When it no longer works - i.e. : the starter will not work...

View more questions Search