Ask Experts Questions for FREE Help !
Ask
    Tesla77's Avatar
    Tesla77 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 17, 2013, 03:44 PM
    Craftsman 20.5hp 42in Lawn Tractor How to remove bottom interlock switch?
    My tractor is a Model #917270860. I have replaced the seat interlock switch and the interlock switch behind dash (for the mower engagement lever) I need to know how to remove the second interlock switch which is being held in by the foot lever or brake some how and I can't get under the mower and deck to see. I can almost push it out but its catching on something and can't see what. It would be nice to have a lift. That's what I need.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 8, 2013, 10:52 AM
    Hi,
    Better off to remove the deck, covered in owners manual at:
    Owner's Manual - CRAFTSMAN Lawn, Tractor 917270860 - ManageMyLife.com
    And notice link at upper left of maula to download.
    Peace,
    Clarke
    Tesla77's Avatar
    Tesla77 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 10, 2013, 12:35 PM
    Thanks Clarke, I did end up removing the deck and it made a world of difference. It's a must. I ended up replacing that switch and it still dies when you lift the deck clutch lever, and when you let out on the foot brake. There's only one more interlock switch left, so if this doesn't fix it I'm all out of ideas. If you have any ideas let me know would you. Thanks, Luke.. .
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Jun 10, 2013, 01:21 PM
    Hi,
    It is obvious to me that it is related to the seat switch and a thing called operator presence. May not be the switch itself, but the associated wiring, but the machine does not "know" the seat is occupied.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blade Switch on a Craftsman Lawn Tractor [ 0 Answers ]

Can someone tell me where the blade switch is on a Craftsman lawn tractor Model No. 917.270930?

How do you change the interlock switch on a craftsman riding mower [ 1 Answers ]

The interlock switch for the clutch. The battery, starter,etc is good. This is about the only thing that I can think of that is left. It's a 20hp Briggs, 46" CUT riding mower, craftsman. I just need to know how to get the switch off.

16.5hp craftsman lawn tractor no start [ 1 Answers ]

16.5 hp Kohler, Sears lawn tractor. Mowing the grass and she just stopped. I have no spark. Have power going to ignition module. Magneto thing near the flywheel is not shorted or opened. Have continuity with plug wire. Help.

How to remove engine pulley on craftsman lawn tractor [ 6 Answers ]

Hello, I have a Craftsman LT1000 lawn tractor (16 HP, electric start, 42" cutting deck"). The engine pulley which drives the drive belt for the rear wheels and the cutting deck has broken (the lower part of the top pulley broke off). I am trying to remove the engine pulley, but I cannot get...

View more questions Search