Ask Experts Questions for FREE Help !
Ask
    ddiskin68's Avatar
    ddiskin68 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2014, 02:46 PM
    Finding replacement part for r8184g1427 oil primary
    I have a r8184g1427 oil primary burner control and can't seem to find it online is there a replacement # for this unit
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    May 5, 2014, 08:49 PM
    I'm not familiar with the 1427 but unless there is something special like it being 230 volts, a Honeywell R7284 should work fine for you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed out oil pump new primary... thought transformer was the problem... opened it [ 1 Answers ]

Opened transformer and gave the burner wheel rite under the electrodes a little jog closed it up hit reset button and it fired rite up for about 15 seconds then flame went back out then u can feel a slight hum coming from the burner motor...

Should the engine light be on after fhe replacement of the faulty primary 02 sensor? [ 3 Answers ]

A 97 Honda Accord LX 4 cyl car has engine light on. It has been scanned by the dealer. The problem is due to the faulty primary 02 sensor. So, the oxygen sensor has been replaced but the engine light is still on. I wonder whether the engine light is supposed to go off automatically after the...

Has anybody upgraded their Primary Oil Relay to the new Beckett Genisys 7505? [ 11 Answers ]

Beckett AFG Burner now has Honeywell R8184G Primary Control. I would like to upgrade to the new Beckett Genisys 7505 Control. Has anyone done this upgrade? Any advice?

GE dishwasher part replacement [ 0 Answers ]

I had a clog in my dishwasher. While taking it apart and cleaning the drain I knocked a small part out of the door rubber seal in the center bottom. It is about three inches long and clicks in. It has one smooth edge and one jagged toothed edge. Does anyone know what is right side up to put it...

View more questions Search