Ask Experts Questions for FREE Help !
Ask
    John Allyn's Avatar
    John Allyn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2014, 01:49 PM
    Double angle plumbing stops
    How to plumb dual sink vanity from one supply and drain
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 4, 2014, 02:53 PM
    Use a double stop fitting that has 1 input and 2 outputs. Drain can be configured a couple of ways, simplest being a tailpiece with an angled extension over to the other drain. Mark or Tom can probably post some pics.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 4, 2014, 06:08 PM
    Try this Double Bowl Sink Drainage Installation - YouTube
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to replace leaking angle stops? [ 2 Answers ]

I have these in my house and they are leaking. How do you replace?

Will plumbing angle stops hold air pressure? [ 3 Answers ]

I am testing a plumbing loop with air pressure before hooking up to the water supply. I wonder if any of the compression stop valves and/or shark bite fittings hold air pressure.

Aquaflow 1/4 turn angle stops [ 1 Answers ]

I installed 1/4 turn tops on sinks. The inspector says I need to remove the 1/4 turn stops and install Aquaflow 1/4 turn angle stops. What is the difference? Is Aquaflow a brand name? Are there manhfacturers?

Angle Stops Problems? [ 1 Answers ]

I have a bathroom sink that has no water, only a drip coming from it. It's a standard 2 handle faucet. While reading other questions, it occurred to me that my problem may be the angle stops being clogged. If this is the case, can I unscrew the valve at the point where the red arrow is in the...

Frozen angle stops [ 1 Answers ]

I can't shut the water off under my bathroom sink. Is their a way to free them up without replacing them?

View more questions Search