Ask Experts Questions for FREE Help !
Ask
    DMcDGO3's Avatar
    DMcDGO3 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 4, 2014, 08:24 AM
    One garage door remote works and the other does not
    I have two garage door remotes for a Chamberlain opener. One works perfectly, the other doesn't, even after a battery change
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
     
    #2

    May 4, 2014, 10:30 AM
    The faulty remote may have lost its programming. You need the instructions to know how to reprogram. Procedure vary. Some can be repogrammed with a proper connection from the good remote to the non-working remote, for example.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garage door opener remote won't open the door [ 1 Answers ]

My remote won't open the garage door. Wall mount will open the door, but continues to blink. Suggestions

How to see if my garage door remote control pad works [ 1 Answers ]

Hi, here is my situation... Bought a home and had to recode my garage door opener on the outside of the agrage door wall. Now I can lift the lid and enter the code and the garage door will open... But, the remote control pad that I have does not open the garage door, as I am driving up to it in the...

How do I syncronize my remote control garage door pad with my garage door [ 1 Answers ]

Can anyone tell me how I can syncronize my remote control pad to open the garage door from the car?? I recently reset my code on the panel, because I didn't know the original code and now when I drive up in the car, my remote contral pad does not work to open the garage door... Any possible...

Garage door remote doesn't close door in colder weather [ 1 Answers ]

My garage door remote works fine when the weather is warm, however, if it gets below 60degrees, it won't close (no problems with opening it). When this happens, the only way to close it is to hold down the manual garage door opener continually until it's completely closed (otherwise it'll start...


View more questions Search