Ask Experts Questions for FREE Help !
Ask
    jody Lebeda's Avatar
    jody Lebeda Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 3, 2014, 08:10 AM
    How do you take the back off a kenmore washer?
    We have a leak above the hose hookup how do we gewt the back off so we can see in there?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 5, 2014, 09:32 AM
    Normally, you do not remove the back. Pop the top off and get to the leak that way. Use a putty knife on each side of the front and push in the clips and the top will come up. You can then unplug the wires and set the top aside to fix the leak, or just tie it up and move it to the side. Here are the manuals: https://dl.dropboxusercontent.com/u/...%20washers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove back off series 80 Kenmore washer [ 0 Answers ]

How to remove control panel from series 80 washer Kenmore to access pressure switch

My kenmore washer 90 series transmission will not push back up [ 0 Answers ]

Hi there I lose the bolts on my 90 series Kenmore washer transmission to fix my coupler but now the transmission will not push back up to bolt on . What should I do ?

Remove back panel to kenmore washer 11023012102 [ 1 Answers ]

I've removed all the screws to the back panel of a kenmore washer serial #11023012102 and the back panel will not come off. What am I missing?

Remove back of kenmore 70 series washer [ 0 Answers ]

I can not get the back of my kenmore 70 series washing machine off. The agitator does not work and I want to remove/replace it.

View more questions Search