Ask Experts Questions for FREE Help !
Ask
    larrys49's Avatar
    larrys49 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 2, 2014, 04:02 PM
    Kenmore Dishwasher Problems
    Dishwasher will not do anything. I have replaced the Circuit Board and the pushbutton pad with new. I have checked the door switch and it is good. I have tried the normal wash/high temp normal wash/high temp cancel routine also and still nothing. Power to everything is on and Volt meter checked. What am I missing?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 2, 2014, 04:15 PM
    Could be the water level switch is stuck.
    larrys49's Avatar
    larrys49 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 2, 2014, 05:23 PM
    Quote Originally Posted by ma0641 View Post
    Could be the water level switch is stuck.
    Just checked it also.. Operates as it should...
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    May 3, 2014, 08:32 AM
    Here are some manuals that will help: https://dl.dropboxusercontent.com/u/...ishwashers.zip
    It sounds like a safety is open somewhere. You can turn off the power and go though it with the ohm meter until you find the spot where the circuit is open. There is a micro-switch in the door that can be open and other safeties you can find on the electrical diagram.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite dishwasher problems [ 1 Answers ]

I have a Kenmore elite Ultra Wash Dishwasher. Model 665.13189K802 The problem is the only light that lights on the panel is the drain light. When the door is closed you can hear the washer draining. However no other control buttons light. Can anyone provide any troubleshooting information. ...

Kenmore ultra wash dishwasher problems? [ 1 Answers ]

Will not run. Lights will not come on. Has not blown a fuse. Circuit board seems dead.

Problems with kenmore quietguard dishwasher [ 0 Answers ]

I have a question about my kenmore quiet guard model 665 dishwasher. First, the dishes on top rack weren't getting clean, I think we have that fixed but now the rinse aide won't dispense out of the rinse aide dispenser. Does anybody have any idea how to fix this? I called and complained to Sears...

Kenmore dishwasher control problems [ 0 Answers ]

I have a brand new Kenmore 665 . 1364 dishwasher. Loaded it this morning, cleaned dishes, turned off and when I opened the door the dishes were clean but water remained and did completely drain. Closed door and pressed the cancel / drain button and none of the controls lite up. Power is on to...

View more questions Search