Ask Experts Questions for FREE Help !
Ask
    sshargots's Avatar
    sshargots Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2014, 07:36 PM
    Trane xe 800
    I replaced the fuses but unit still won't turn on, I turned off all of the breakers to try and reset, what else do I need to try to reset the unit
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 2, 2014, 07:39 AM
    You need a digital multimeter to diagnose what is wrong with it. You need to know if you have control power (24 volts) and power to the various components. You could also have a safety that popped open and all you need to do is to reset it. Some have a red button on the outside unit that will open if the coils are dirty. Here are some diagrams: https://dl.dropboxusercontent.com/u/...20Diagrams.zip
    And manuals: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...Electronic.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane heat pump xe 800 [ 1 Answers ]

What's the amps and coil voltage on my compress contactor. Its stuck and need to be replaced. But no information on contactor.

Trane XE 800 [ 1 Answers ]

My Trane XE 800 is now in the A/C mode and I notice a problem. When the house comes down to the desired temp, the outside (compressor) fan shuts off, but something else continues to run. Does the outside unit have two motors, the fan and the compressor? Do they both have contactors? Where are...

How to wire a trane 900 series thermostat to a trane XL13i heat pump [ 1 Answers ]

How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

Trane xe 800 heat pump [ 3 Answers ]

I have a Trane XE 800 heat pump. The AC cycle works fine but now we have switched over to heat and the AC will not disconnect outside. I have since flipped the breaker on the outside unit and we are runnning the AUX heat until we can figure out why. Please help. Thanks.

View more questions Search