Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane XL20i heat pump requires Trane 900 series thermostat?
[ 2 Answers ]
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.
Trane xl 1100 heat pump
[ 11 Answers ]
I have a trane xl 1100 heat pump split system the outside fan shuts off for no reason all readings are good I have tried 3 different motors with blades that were the right size but still runs about 20 minutes than shuts off, the compressor keeps humming I have had 2 techs look at it but have no...
Fan on outside trane heat pump not running should it be?
[ 1 Answers ]
We have two trane Heat pump units A larger and smaller unit The fan on the larger unit I can see running outside The fan on the smaller unit I have not seen runnning. We have tried turning it off and on and the heat up and down Should it come on and run. I believe the air out of this unit is...
Trane Heat Pump
[ 6 Answers ]
I have been working on a Trane Heat Pump and the problem I'm having is the thermostat won't engage the compressor for heat, but it does on cooling mode, and in fan only mode. I jumped the thermostat at RH and G and the unit kicked on. I have replaced the thermostat and still it does the same...
Trane 1200XL heat pump
[ 4 Answers ]
Hey Folks, I have a Trane 1200XL heat pump and every once in a while when the unit cycles on, the condenser fan and compressor won't go on but I hear the unit humming. After 30 to 90 seconds later, the condenser fan and compressor kick on and everything is OK. I tried replacing the... View more questions Search
|