Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a Kenmore HE3 Gas dryer, the dryer will ignite and run for several minutes but
[ 1 Answers ]
My Kenmore HE3 will start and run, flame wiill ignite and run for several minutes but will not relight when dryers calls for heat. Glow plug turns on but gas valve will not open. I have continuity through gas valve coils, thermistor,Thermal fuse, highlimit thermostat and flame sensor
GE dryer drum not turning- felt ring destroyed- dryer just hums when you start it?
[ 2 Answers ]
GE Model DHDSR46EG6WW Serial MR701623A
I have a frigidaire dryer model number FEQ1442ESO. The dryer runs but doesn't heat.
[ 0 Answers ]
I'm guessing the thermal limiter is bad, but can't figure out how to get to it.
The outlet for my dryer made a popping noise when I turned the dryer off. Fuse?
[ 3 Answers ]
I had the dryer running and turned it off. At that time, the outlet made a popping noise. The dryer doesn't run anymore. Can it be fixed?
Dining room circuit only works while dryer is running, Dryer doesn't heat up?
[ 7 Answers ]
Old house with knob and tube wiring. Dryer has 3wire w/ground. 60 Amp Fuse Box. With the lack of circuits there is a lot of fuses blown. Friend/owner has upped the fuses all to 30 amps and has been warned of the dangers associated. Dining works normally some of te time, but at different periods it... View more questions Search
|