Ask Experts Questions for FREE Help !
Ask
    ubersku's Avatar
    ubersku Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 22, 2014, 07:44 AM
    Changing light fixture- wires ( red, black and white?)
    Remodeling the kitchen. Took down old light fixture and removed second (switch loop) switch and capped off all three wires.

    Replaced fixture - wired (fixture/power) white/white, black/red, capped the black
    Replaced the switch (now the only switch left since removing the second switch).
    It is three-way wired according to instructions.

    Light stays on when switch is operated. Ugh.
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #2

    Apr 22, 2014, 11:13 AM
    You are going to have to be more explicit. It sounds like you are converting the light from being controlled by two 3-way switches to a single 2-way "on/off" switch - correct?

    Quote Originally Posted by ubersku
    removed second (switch loop) switch and capped off all three wires
    Capped off red, white and black wires in the light fixture box that run to the old 3-way switch that you are cutting out of teh circuit, right?

    Quote Originally Posted by ubersku
    Replaced the switch (now the only switch left since removing the second switch).
    You replaced the 3-way that remains with a standard 2-way On/Off switch, correct?

    Quote Originally Posted by ubersku
    It is three-way wired according to instructions
    I don't follow - it sounds like you installed a new 3-way in place of an old 3-way - why? How did you connect it?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing light fixture- wires ( red, black and white?) [ 24 Answers ]

Just changed light fixture. When I put the power back on the light worked but the switch on the wall will not shut the light off. In the ceiling there was 3 wires. One black,one white and one red. The fixture that I put up has only black, white and ground. So I attached the black to black,...

Wiring new fixture, red,black and white wires [ 15 Answers ]

From switch many white wires,wire nutted together, black to switch, red to switch. From ceiling, whites nut together black nut together ,red nut together.one black wire Hanging down from previous light fixture, one red, and one white. Which wires do I use for Fixutre which has one white...

How to wire a light fixture with red black and white wires [ 2 Answers ]

Installing outdoor light fixture. Fixture has a white, a black and a green ground wire. There are two switches and a sensor in the garage. The wiring on the wall outside the house to the fixture has a red, a black and a white wire. How should the wires be connected for proper operation of the...

What wires do I use to hook up a ceiling light I have a red black and white [ 1 Answers ]

I have a Red, White and Black and copper wire coming out of my ceiling and my new light fixture has just a ground and a wire that has to be split, my question is what wires do I hook to from the ceiling... ie black/white red/black red/white?

Replacing light switch with dimmer red black blue white wires [ 0 Answers ]

I'm replacing a light switch That Controls on light socket in the room for a lamp with a dimmer switch my old switch had 2 black wires and a white but the new dimmer has a red black blue green the new lights have only black and white wires ? How do I make this light work with this switch ?


View more questions Search