Check out some similar questions!
Trane gas furnace only one gas burner ignites temporarily then shuts off
[ 1 Answers ]
Have a Trane XL80 furnace. We switch the furnace on but after the initial ignition it turns off. And then repeats about a minute later, and then again. Only one and sometimes three of the burners are temporarily igniting. We have removed and cleaned the heat sensor and replaced the igniter...
I have a trane gas furnece and no heat
[ 2 Answers ]
Everything is working but no heat because the gas valve is bad
Do trane gas Furnace have belt and how to fix trane gas Furnace
[ 1 Answers ]
I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(
Gas Trane furnace clicks and lights blue flame, but no heat
[ 2 Answers ]
My not-very-new Trane gas furnace has been struggling intermittently for many months. It's only gotten really bad about 3 or 4 times. Here's what it does: - Quiet clicks I can hear when standing next to it, about 2 per second - Loud clunking noises about once every 5 or 6 seconds, I can...
Trane furnace ignitor will not ignite gas for heat, blower will not go off
[ 2 Answers ]
I have a Trane unit and the ignitor does not produce a flame. The unit's blower runs and keeps the house at 62 degrees, 29 degrees outside. I have had this same problem once before and I was told that all that was needed was to clean some part in the furnace. Do not remember what that part was. ... View more questions Search
Add your answer here.
|