I have a trane gas furnece and no heat

Rodriguez31 Posts: 2, Reputation: 1

New Member

Jan 8, 2010, 02:39 PM

I have a trane gas furnece and no heat

Everything is working but no heat because the gas valve is bad

Rodriguez31 Posts: 2, Reputation: 1

New Member

Jan 8, 2010, 02:40 PM

Gas balve

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Jan 8, 2010, 02:43 PM

Sorry to hear about it,, /,what is the question?

Add your answer here.

Check out some similar questions!

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

Gas Trane furnace clicks and lights blue flame, but no heat [ 2 Answers ]

My not-very-new Trane gas furnace has been struggling intermittently for many months. It's only gotten really bad about 3 or 4 times. Here's what it does: - Quiet clicks I can hear when standing next to it, about 2 per second - Loud clunking noises about once every 5 or 6 seconds, I can...

Trane furnace ignitor will not ignite gas for heat, blower will not go off [ 2 Answers ]

I have a Trane unit and the ignitor does not produce a flame. The unit's blower runs and keeps the house at 62 degrees, 29 degrees outside. I have had this same problem once before and I was told that all that was needed was to clean some part in the furnace. Do not remember what that part was. ...

Trane Gas Heat does not turn off automatically [ 1 Answers ]

I have a Trane Gas Furnace installed in 2005, Model TUD120R9V5K 4 coupled with a Trane Programmable Thermostat. Been working fine without any problem. The heat is set at 68. Last night it came on as it automatically does, but would not turn off. Finally when it got up to 78, I turned the Thermostat...

Trane gas/electric. Heat will light but won't stay on [ 4 Answers ]

I have a trane single packaged gas/electric 2 1/2 ton. The gas will light but after about 5 seconds goes off. It does this three times then the system goes into system lockout, no heat. You can reset power and it will start the whole process over. I have changed the ignition plug, flame detector...