 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 561CJ030 A/C troubleshooting
I have the 561CJ030-E unit. It is making an intermittent squealing noise. Can't decide whether it's the fan. The noise comes and goes so I don't think it is bearing related. Is there a belt drive on this unit? Is there an exploded view available?
|
||||
Check out some similar questions!
The blue and red (heat & cool) buttons are stuck in the 'in' position. When the thermostat 'on' button is pushed in, only the red (heat) light comes on.
Unit trips breaker immediately when it comes on
I have a Dual system for my house. One of them does not turn on, no fan movement. Circuit breakers are both ON. Where is the best place to start looking for the problem?
Went to turn on unit for the first time this year and it is not working. I cannot provide much more detial than that. I was reading and it says there is two breakers; one at the electrical panel which I checked and one behind the unit outside which leaves me puzzled. There is a plug that when I...
I have a 23 year old "Bryant Plus 90" furnace. Until my house reaches the thermostat setting the burners remain on and the blower cycles on and off in 7 to 10 minute cycles. Should the burners remain on without the blower being on?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
