 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Faulty Hunter Irrigation System - Pro-C Controller
How do I resolve this problem myself or what do I need to do?
The electrical fuse on my hunter irrigation system pops after running for about 2 minutes on station 1 but works perfectly on all other stations if I bypass station 1. |
||||
Check out some similar questions!
I have a faulty dual zone controller board that I have nursed along for a quite some time now, but it's finally really dead. I can't afford to replace it so I was wondering if I might bypass it and connect my primary thermostat directly to the AC unit itself. Can anyone tellme if this is a viable...
-------------------------------------------------------------------------------- Irrigation system controller (Rain Dial #RD-1200 - James Hardie Irrigation). Also connected to system is a rain sensor. Used the "manual mode" for one zone with success yesterday. This a.m. the auto irrigation...
Irrigation system controller (Rain Dial #RD-1200 - James Hardie Irrigation). Also connected to system is a rain sensor. Used the "manual mode" for one zone with success yesterday. This a.m. the auto irrigation failed to run and I'm unable to modify any setting. Unable now to run manually. The...
I have as split-unit heat pump. When I got home the other day, it was 90 degrees! The air coming out of the vents was warm. However, neither the outside fan nor the compressor were running. A technician told me that the controller board was faulty but he would not be able to replace the board until...
Five in-ground controllers (zones) handle my sprinkler system sprinklers. These controllers are in 5 different areas on my property. I noticed today that when zone one comes on that zone two comes on at the same time which never was the case in the past. As a consequence, the pressure is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
