 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Irrigation system
Irrigation system controller (Rain Dial #RD-1200 - James Hardie Irrigation). Also connected to system is a rain sensor.
Used the "manual mode" for one zone with success yesterday. This a.m. the auto irrigation failed to run and I'm unable to modify any setting. Unable now to run manually. The "display" is frozen with code #1112 in upper right. All system "checks" have been performed; 9 Volt battery change, plugs, electrical connection. Please advise. |
||||
Check out some similar questions!
How do I set the irrigation system to run every other day.
How do I maintain 60 psi in my irrigation system
I have an irrigation system with an underground well, a tank, a pump start relay switch, a timer and a pressure switch set to turn on at 20 psi and off at 50 psi. There are 3 zone valves connected to the timer. There is a separate zone for hose bibs that is not connected to a valve or the timer,...
Is a drip irrigation system cost effective? It takes four hour's to water the plants properly with a hose.
Five in-ground controllers (zones) handle my sprinkler system sprinklers. These controllers are in 5 different areas on my property. I noticed today that when zone one comes on that zone two comes on at the same time which never was the case in the past. As a consequence, the pressure is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
