 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What's the easist way to remove a Quest stop valve without damaging the copper pipe?
I'd like to get rid of the old Quest PB stop valves in my bathrooms. Is there an easy way to get the ring off? Mine have what looks like stainless steel rings that keep the nut from sliding off the copper.
Did one with brute force but there's got to be a better way. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a threaded copper pipe thatcomes out from the wall (tub spout) that I can't remove. I cut the wall open and using a monkey wrench first then a plumbing wrench tried to unscrew the pipe from the shower unit. I have gotten it turn a few times but it won't budge much. Now the end is stripped...
Is it allowed to install Cast Iron Gate Valve with Copper Pipe installation both are flanges type? Any material reaction for both materials?
I have a water softener with a brass valve that the copper water pipe connects to. The copper pipe has a hole in it and needs replaceing. I am trying to remove the pipe from the brass valve but can't get it to loosen. I am using a common small propane bottle with nozzle. Any help would be greatly...
Is it OK to solder the copper feed lines and shower stub to the brass faucet valve body or should I use compression connectors?
I have a shower valve body (brass) and am trying to solder copper pipe to it. For the life of me I can't seem to get the pipe and fitting hot enough to melt the solder. I noticed soldering copper pipe to the drop elbow took more flame heat than normal. Is there some trick when soldering copper...
View more questions Search
|
