Ask Experts Questions for FREE Help !
Ask
    buster2's Avatar
    buster2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2014, 03:38 PM
    9013FSG2J24 Pumptrol pressure switch does not shut off on it's own.
    Old 40/60 pressure switch would not shut off, notice the breaker switch on wall would be kicked out the next morning. Adjusted #2 nut, that worked for a few days but then again, it would not shut off on it's own. Replaced it with brand new pressure switch, still have same problem, does not shut off on it's own. Any idea what problem could be?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Mar 17, 2014, 03:43 PM
    When you replaced the switch, did you check the little pipe it attaches to to make sure it was not clogged?

    Are you sure the pressure is getting up high enough to hit the cut out point?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pumptrol pressure switch [ 0 Answers ]

I am having problems with the Chlorinator not sending chlorine to the house. My unidose pump is working find its about 16 years old but I have been servicing it yearly with new parts and the water softener is working find. I can see the chlorine coming through the tube from the pump but I am only...

Pumptrol pressure switch [ 2 Answers ]

How to adjust a water pump pressure switch/regulator?

Pumptrol pressure switch [ 2 Answers ]

I just put on a new switch and adjusted it to 30 cutin and 50 cutout like it says to do and when it shuts off, why doesn't it hold pressure until I run water? It loses pressure as soon as the swith and pump shut off.

Pumptrol pressure switch [ 0 Answers ]

The switch doesn't shut off. It flickersback and forth. Sometimes it shuts off sometimes it keeps on running. Its like it is trying to make up its mind but doesn't know

Pumptrol pressure switch [ 1 Answers ]

I have a fsg2 square d well pump switch. If I want to get the max pressure, can I do it by adjusting one of the screws only? Charles

View more questions Search