Ask Experts Questions for FREE Help !
Ask
    cblksun's Avatar
    cblksun Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2010, 08:41 PM
    Pumptrol pressure switch
    I have a fsg2 square d well pump switch. If I want to get the max pressure, can I do it by adjusting one of the screws only?
    Charles
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 9, 2010, 08:00 AM

    Turn the large center nut clockwise. That will increase both the cut in and cut off points. It will maintain about a 20# differential between the two.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adjusting pressure on Pumptrol Pressure Switch [ 9 Answers ]

Model #9013FSG2J21BP

How to wire a 20-40# pumptrol pressure switch for a deep well? [ 4 Answers ]

Hi all: My daughter asked me to wire power to her deep water well... I will be using #12 2 wire w/ ground through a 20 amp circuit breaker to a 20-40# pumptrol pressure control switch... The pumptrol has four terminals in a line, the two end terminals are marked "L" and the two center terminals are...

Loss of Water Pressure using a Pumptrol control switch [ 2 Answers ]

Hi, I recently lost water pressure in my home to the point where I have no running water. I am on a drilled well and use a pumptrol pressure switch with a Xtrol pressure tank. I've been able to get the pressure back up to 30 psi manually however whenever I run the water it rapidly decreases back...

Does Pumptrol D Switch Need Changing? [ 13 Answers ]

Yesterday while taking a shower the water pressure fell to a trickle for about four seconds then came back again. This went on for the length of my shower. Today, while washing a few dishes the same thing happened but for a few seconds longer. I went down to check the pressure and noticed that I...

How to change sq. D pumptrol pressure switch? [ 5 Answers ]

Hi. I am using well water for my residence. Lately I start having pressure problem. The pressure switch is not activating when the water is flowing and the pressure goes down to 20 psi then drops to zero. After awhile the switch activates and build up the pressure to 100 psi. The switch is set for...

View more questions Search