Ask Experts Questions for FREE Help !
Ask
    zincker's Avatar
    zincker Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 1, 2014, 10:25 AM
    Inducer problems
    I Have a Bryant 90 plus furnace installed in 2000 and the inducer is rattling on and off.. mostly at start up. I think the motor is fine because the noise is coming from the wheel behind it. Does it make sense to just replace the wheel if the motor seems fine considering it is 14 years old? And how hard or expensive is it to do?
    Thanks Steve
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Mar 1, 2014, 07:06 PM
    You would probably have to buy a whole inducer. Try searching the web for a part number. From there you should be able to find some prices.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is a inducer motor [ 1 Answers ]

What is a inducer motor

Another name for inducer housing [ 0 Answers ]

Is there another name for the inducer housing?

The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman. [ 8 Answers ]

FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S

REEM inducer blower problems [ 69 Answers ]

I have a REEM RGRA 07EMAEB fyrnace. The blower motor comes on but doesn't suck enough to close the pressure switch. My exhaust and intakes are free of obstructions have proper termination, proper amount of elbows and my ptrap is working properly and draining. I changed the inducer motor and...

Inducer Motor Problems [ 6 Answers ]

I have a Goodman Gas Furnace installed in 1997 and have been experiencing the following problems: The usual run for the furnace has been inducer motor on, ignition (with flames), and then the blower motor comes on. I have been having the inducer motor come on, run for about three minutes,...


View more questions Search