Ask Experts Questions for FREE Help !
Ask
    Rchauls's Avatar
    Rchauls Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2014, 01:26 PM
    Splicing mwires for a vacuum cleaner
    When splicing a three-wire cable to a two wire one, which colors on the 3-wire (green blue and brown) do I attach to which colors (black and white) on the 2-wire?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Feb 23, 2014, 05:38 PM
    Where are the 3 wires? That is not typical colors used for wiring except in conduit. Green is not code approved for carrying current, only as a ground.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bissell Vacuum Cleaner [ 11 Answers ]

My Bissell Vacuum Cleaner Model 3910 is very very loud. I took it completely apart and cleaned everything(it was very dirty inside). It is still very loud. Suction is very good. I have no idea how old this vacuum is. What can cause this to be so loud? Do you know where I can find a manual for...

ElectroluxE-2000 vacuum cleaner [ 1 Answers ]

The motor makes a funny noise and the brushes make sparks. How to get access to the motor to check the bearings, etc.

Vacuum cleaner woes [ 1 Answers ]

Hi all, I have a Bissell model 3594 bagless vacuum. The handle release pedal Has broken. I found the part, but my problem is removing the old Pedal and putting the new one in. Thanks in advance. Andy

Henry vacuum cleaner [ 4 Answers ]

The low power switch does not work , but the high one does. >Moved from Forum Help<

Best vacuum cleaner? [ 2 Answers ]

I am thinking about buying a new vacuum cleaner and would like a recommendation on one that you have found to be good at really suctioning up the dirt. Price is not a factor.

View more questions Search