Ask Experts Questions for FREE Help !
Ask
    marjdgray's Avatar
    marjdgray Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 21, 2014, 04:38 PM
    No hot water
    I have recently replaced tub and put in new faucets, the hot water only gets warn not hot. The sink get very hot, why not in the tub?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Feb 21, 2014, 06:03 PM
    Hi

    The new tub or tub/shower faucets should have a TEMPERATUE LIMITING DEVICE as part of the valve. Read the instructions provided or contact the manufacturer of the faucet and get proper instructions on how to make proper adjustments. Your valve temperature, once set, should not exceed 125F at a maximum (use store bought thermometer from hardware store to set temp.).

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Had no hot water but had cold water... defrosted pipe from main to hot water tank. I [ 4 Answers ]

Very cold in Ohio... 25 below... had cold water but no hot water... defrosted hot water line from attic to tank... have hot water in kitchen but no hot water in bathroom. Have the shower valve for hot water open and when I turn on the cold water in the hand sink, water comes out of the faucet in...

No hot water coming out of hot water side only cold... hot water heater is working [ 3 Answers ]

Hello, I need help bad. I am a woman writing to you whose husband has given up on the problem and will no longer work on this. He doesn't care if we have hot water cause he can take a shower at work. I cannot. It is the dead of winter here in Colorado. We had frozen pipes that burst in the wall...

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

No hot water pressure/hot water after turning main water off/on and draining water [ 5 Answers ]

I turned the main water off to our home to remove our water softener and ran the water in the kitchen and both bathrooms until no water came out. Now there is no hot water pressure or hot water at all sinks after turning the main water back on, but there is normal cold water and cold water...


View more questions Search