 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire a fan light combo to two seperste switches and one power source
I have a bathroom fan light combo and I want to wire it to two separate switches. The combo has a black white and green wire also a blue for the light and brown for the fan. Also as yellow for common and a red for a night light but I am not using that. I have run a 12/3 from the combo to the switches also the power source is in the switch
|
||||
|
||||
|
At the switch connect the two white wire together with a wire nut. Connect the black of the in coming power to both switches. Connect the black of the 12-3 to one switch. Connect the red to the other switch. Connect grounds together.
Follow instructions for wiring at fan/light comb or restate the wires in the unit. You list to many wires, unless this is a heater, fan, light night light unit and the yellow is really a white. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How do I wire 2 separate dual slide controls for 2 separate ceiling fans with lights from one power source in a 2 gang box? One dual controller is to independently control the fan from the light in ceiling fan 1 and the other dual controller is to do the same for ceiling fan 2. Can this be done...
I have a light fixture in my mud room that is currently fed from a switch on the outside of the room. Is it possible to pigtail from the power at the fixture to install a second switch to control that fixture, as well as wire a new switch to control a new second fixture. I've attached a...
Power source is coming into switches from the light. Want to run power to a second light from the switch. How do I jump the power source. Using 14/2 already run. Don't really have a choice to replace
I have built a new 2 piece bathroom and I have 3 separate switches all right beside each other and I want to power all 3 from one feed. (one is for the bathroom light, one is for the fan and the other is the hall light) How do I wire them so that they all work independently?
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
View more questions Search
|
