 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor Breeze Wakefield Remote Issue
I just bought the Wakefield ceiling fan (40105) yesterday, we still cannot get the remote to operate correctly.
I cannot stop the fan, although I can change speeds. Also, I cannot get "just" the up lights to come on, worked for a while but now will not do it. I've changed the dip switches from 0 to 1 and back using the program or Learn/Sync option, but no luck. The Learn seems to take, with light blinking on and off 3 times, but no change in the operation. Fan is hung on a 12 ft ceiling with a 36 in down rod, no other fan remotes in my house. Could a new/different remote possibly work to correct my issue? |
||||
Check out some similar questions!
I have a hampton bay harbor breeze ceiling fan with remote control. The battery died on the remote. I replaced the battery but get no response from the ceiling fan from the remote. I can see the light on the remote go on when I depress a button on the remote. No change in lights or fan speed. I...
I have 3 fans in different parts of my home however the remotes from each work the others all over the house ,how do I change them to work only in each room?
I have three ceiling fans that I installed a couple of years ago with the remote control. I had them all set to the same freq. so one remote contolled them all and I have had not problems until now. After leaving for a week on vacation we got back and none of the three fans will respond to the...
My remote only activates the fan, not the light, changed the battery,the little light comes on the remote for the fan but not the light,,
Thank you for this wonderful forum! I have a newly installed Harbor Breeze ceiling fan w/remote and no pull chain. Wishing now I got the one with the chain.. There was a dimmer in the wall switch where the fan operates from so we swapped it for a normal one. The fan works fine with the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
