 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a 4 year oldmonitor 2400 which has been totally reliable until recently. I have been through the error 14 stage with dirty filters at the tank and at the heater as well as running out of fuel. This problem is error 13 where the unit fires up for approx 2 minutes then shuts down, I removed...
No error code. When unit reaches set temp, cuts off & temp set & room lights flash. When room cools to set temp or below, unit refires OK and heats up to set temp but temp set & temp room continue to flash all the while. For this reason, I cannot program the unit. I have rebuilt older Monitor units...
Hello, I need some help please.. I recently bought a 2400 series monitor heater second hand. I replaced my older 441 model so I used the same exhaust and intake and lift pump. After I installed the new unit I ran it for some time and it ran fine. Ran it two more times no problem. Then one day it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
