 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
If you have the cabinet door off this furnace where the burners, draft motor are located and turn the thermastat up the furnace will go through all of sequences like it's suppose to and will turn off after the thermastat is satisfied and will continued to work like it's suppose to, but the minute...
I have a Heil Gas Furnace and the blower keeps running all the time. The heat comes on when called to but once the temperature gets warm enough for the heat to turn off the fan keeps running. Once the heat turns off the fan blows cold air. The fan is on auto and I have cycled power several...
Heil furnace fan just comes on by itself. Never happened before. However I replace the thermostat in February and was wonder if that may be the issue.
Heil gas furnace model GDE075F16A3. The furnace just quit working. The fault was a broken lead on the secondary of the 115V to 24V transformer. With the furnace operating again, I noticed that the blower motor/fan assembly was vibrating. The wife and I removed the assembly for inspection. During...
This summer I had my air conditioning unit replaced after the previous one unknowingly froze up and as a result blew up. The new unit was working well after it was installed in conjunction with the natural gas furnace without issue - albeit the blower on the furnace unit distributes the cold air...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
