[jbee]

After speaking with a few mechanics about this, It seems to be that maybe the rewiring that was done could possibly be causing the stalling problem. I described the way the car stalls(what it does right before it stalls) and a mech. That knows a bit more about hondas then another I spoke to (maybe)said it sounds like a bad ground. So I got more than one opinion about the problem and I got all different answers. I know I asked you if you could help me find directions on how to change distributor, but now I'm being told that may not be the problem. I think I would like to try and locate an easy to understand electrical chart or diagram for this car(89 honda civic) just to try to identify where something would be that may cause this type of prob. Ex.like for instance the grounds the mech. Was talking about that I spoke to on the phone. I have not had anyone really look at the car in person that could point something like this out to me or discover some type of electrical prob. Type wire or something, cause I am afraid to move car cause it stalls and then won't start when it gets to temp mid point. Can you help me locate a electrical diagram(or maybe a place to download)?

If not thanks for your previous help on the matter, and for responding so quickly, I really appreciated the input.
jbee

[TxGreaseMonkey]

For wiring diagrams, I would suggest buying a Haynes Manual. I don't have anything else or know of an internet site containing electrical charts.

Most of the time, these type of problems involve the main relay, ACG fuse, or ECM. Get someone to help you check for any codes being thrown.

[jbee]

Thanks a million man , you're the best.

jbee