Ask Experts Questions for FREE Help !
Ask
    leegreen0306's Avatar
    leegreen0306 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2014, 02:53 PM
    I want to know how much surface area is needed to heat water 1 degree flowing at 630
    I want to know how much surface area needed to heat water 1 degree flowing at 630 gallons per minute through a 3 inch tube.
    Kukui23's Avatar
    Kukui23 Posts: 27, Reputation: 1
    New Member
    		  
    #2

    Feb 1, 2014, 04:07 PM
    Not enough info. What's your source temperature? What is the tube made of? The hotter the source, the time you need to heat it and the less surface area you need. There are too many factors with the very limited info you gave.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Feb 1, 2014, 04:45 PM
    Is this a homework question? Back to you. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water stops flowing from bathroom faucet; cold water is flowing fine. [ 6 Answers ]

Hi: I have a Moen Monticello faucet in my bathroom. The right-hand side handle that delivers cold water works fine. When I turn the left-hand side handle slowly fom 0 to 45 degrees, hot water starts flowing as usual. But if I turn more than 45 degrees, I can hear a thud/click and the water flow...

How much heat is absorbed by 300g of water when it is heated from 25 degree celsius t [ 1 Answers ]

How much heat is absorbed by 300g of water when it is heated from 25 degree celsius to 75 degree celsius? I need the explanation and the correct answer to this

Kenmore 630.1630 no water [ 2 Answers ]

No water is entering the dishwasher

Surface area [ 3 Answers ]

What is the surface area of a triangular prism? Length = 6 Width = 4 Height = 10

Water table at ground surface in a flat area? [ 1 Answers ]

How would you recognize it when the water table is at ground surface in a topografically flat area?

View more questions Search