Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
240v transformer to 120,208,240v what wires
[ 3 Answers ]
I'm replacing a 240v transformer in a split heat/cooling unit. The old trans has 4 prongs 2 load 2 line the new one has two secondary and 4 primary wires what wires do I use for primary?
Can I use a Lower Watts Element(3500w) instead of(4500w) on Water Heater?r
[ 3 Answers ]
Will the water heater work with this change of element wattage?This is for the upper element since the lower element is not working. Original requirements for this water heater: Upper element: 4500w, 240v Lower element: 3500w, 240v Thank you, RB
240v breakers forces 240v through 1 leg?
[ 2 Answers ]
My single phase power panel works fine, as long as all of the 240v breakers are off. Service into the main breaker reads a steady 120v on each leg from the transformer, and 240v across both legs. But, when I flip on ANY of the 240 breakers, all 240v jumps to one leg of the panel (for both single...
Giant water heater wiring 120v 0r 240v
[ 14 Answers ]
Hello Thank you to TKRussell and all the other folks who helped me with my sub panel problem. It is installed and working great. What a pleasure to have a place to hook up new circuits! My issue at hand now is as follows. My friend just around the corner is hooking up is water heater and...
Replace 240v Water Heater Circuit with 120v Receptacle?
[ 4 Answers ]
I have a 240v electric water heater that I am getting rid of (going NG tankless). Can I use the now unused 240v wire that comes from the breaker panel as a 120 volt receptacle so I can have a plug on the wall where the old electric water heater was? The new tankless water heater is going... View more questions Search
|