Ask Experts Questions for FREE Help !
Ask
    amvo2411's Avatar
    amvo2411 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 18, 2014, 01:56 PM
    Blueprints the sewer system of the city of bastrp, la,
    What dose its look like ?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jan 18, 2014, 02:05 PM
    It looks like a blueprint and if you are lucky, it can be obtained at your local sewer authority...just give them a call on Tuesday and see if they have them in their archives...;)

    Mark
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jan 19, 2014, 02:45 PM
    I'm curious! Why would you want to know this? Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

City Sewer or Septic [ 2 Answers ]

What are the requirements for hooking into the City of Omaha's sewer system as opposed to replacing an old septic tank with a new septic tank? We are considering buying a house that currently has a functioning 1000 gallon septic tank that was homemade from concrete cinder blocks at an unknown...

Back charges from city sewer [ 2 Answers ]

We bought our home in March of 2006. We are in a partially rural area. Our home on 5 acres has a well and leach field. I just got a call from the city sewer saying there is a sewer hook-up for our property down at the road and we owe 6 years of back sewer fees, interest, late charges and...

How to vent city sewer lines? [ 1 Answers ]

I have a restaurant on the high side of a shopping center. We have installed odor hogs on everyvent as well as gaskets on the grease trap lids. Wax rings were replaced on all water closets. The building has been power smoked four times. We are eliminating negative pressure at this time. ...

Sewer hook up to city riser [ 3 Answers ]

Good morning: Have a 50' run to city riser, according to my calculations I need to hook up to the riser appx. 12.5" down the riser from ground level to give the run 1/4" per Ft. . What fittings do I need to hook up to a 4"riser? I assume it's a sweep surely not a 90 degrees. Thanks in advance ...

Add city water to well system for sprinkler system. [ 6 Answers ]

Hello, My sprinkler system runs off an irrigation well system with a bladder tank. The well has a 1HP Jet pump that will only pump 8 gpm @ 40-60 psi. As the system runs after 3-4 minutes the pressure will drop to 20 or so psi and the sprinkler heads start to drop. So I'm not getting enough water...

View more questions Search