Ask Experts Questions for FREE Help !
Ask
    duncanh's Avatar
    duncanh Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 17, 2014, 01:33 PM
    Trane model number find control board 50a50471
    The code indicator on the board 5 times in a series indicating a problem with the flame sensor. Replaced flame sensor and 24hrs laters the code indicator is flashing 5 times in a series again. What would be the solution?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Jan 19, 2014, 08:59 PM
    Make sure all contat points dealing with ground or the flame sensing circuit are clean & tight. Also check that the flame is hitting the sensor well.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe80 control board [ 2 Answers ]

I have a Trane xe80 furnace. I hear a small hum from the control board when the furnace is not running. Is this normal? The red light blinks as usual.

How do I remove panel to remove defrost control board model number aff2534few1 [ 1 Answers ]

Have ice up coils tested bimetal an heater all ckecks check OK need to replace defrost control not sure how located under ref light ?

Need a new circuit board for a Trane Model number [ 0 Answers ]

My situation is similar to the previous post. My model number is different TDY060r9v3w4 . Will the honeywell work with my unit? I have no heat only cold air.

New control board old trane [ 0 Answers ]

Just put on new conversion control board on trane 80. Led lights up but nothing happens. Jumped thermostat and inducer and blower comes on but light blinks 4 times( open temp limit circuit). Have my family in house n its turning cold. Worked on many units install not tech. Need help.

Diagnosis of control board in Trane unit [ 10 Answers ]

Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board...


View more questions Search