 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Can't turn handle control for hot/cold water faucet on tub
On my tub there are 2 separate controls one controls water pressure for shower or tub. The other controls the water tempeture. This is the one I cannot move up or down. It acts like it is frozen. This is a Delta 2300 series right temp. monitor lever. If anyone has had this similar problem I would appreciate some feed back on what I can do.
Thank you |
||||
Check out some similar questions!
I have a single handle faucet in my bathroom. When I swing the handle to the cold side nothing come out. The hot side works fine. I tried to see if the cold line was clogged. After loosening the nut at the bottom of the line (near the cold water valve), I found it difficult to dislodge the line....
I have a one handle bath tub water spout. The first part which is round turns the water on. Behind that is a handle that turns from cold to hot. That handle is turning hard. I have taken them off and there is a (looks like hex nut) on a pipe which goes into the wall. I do not know if that is...
I have a 1 handle tub and shower faucet that when you start turning to add cold water it makes a loud motor boat or vibrating sound. I replaced the cartridge because of the noise It does seem some better, but still noisy can anyone please help. Thanks
I have a one handle that controles my shower and tub to turn on my shower when I pull up on handle that is on top of faucet to send the water up to the shower not much come's out of the shower head and it still comes out of the faucet are the gut's hard to replace and how do I do it sometimes it is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
