Ask Experts Questions for FREE Help !
Ask
    sirbrian1's Avatar
    sirbrian1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 7, 2014, 10:12 AM
    Craftsman Riding Mower Problems
    My lt1000 17.5 hp riding mower has a cranking problem. Cranks fine until it stops on a comp. stroke. Then it won't crank. Spin the motor a little by hand works fine again. New starter new battery.battery has 230 cca is that enough? Any ideas? Cables are OK. Oil visc. OK
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 7, 2014, 12:07 PM
    What is the temp where it is stored? 230 should be fine, can you test the specific gravity of the acid or at least test the voltage, should be about 12.7 volts.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting craftsman riding mower starting problems [ 0 Answers ]

My brother has a craftsman riding mower with a 16 hsp. B&S engine that ran great all summer.now he just pulled it out to cut the grass and it won't start.It turns over fine, gets plenty of gas, and tried starting fluid. Don't think it is a fuel issue.Checked for spark and looked pretty...

Craftsman riding mower runs but shuts off when turning on the mower deck [ 0 Answers ]

I have a craftsman riding mower 26 hp b&s with a 48" deck. It's been running fine till yesterday went to mower and as soon as I turn on the mower deck it shuts off. It starts right back up when I try it again off it goes. It seems like it has something to do with the clutch am I right? Thanks ...

Putting lower belt back on mower deck, Craftsman riding mower [ 1 Answers ]

What is the tension pulley? Gram, 67, wants to know? Replacing belt myself hopefully. Craftsman riding mower, lower belt came off. Have lowered deck, belt is loose, not sure where it goes, studying manual but how engage, disengage tension pulley?

I need a mower deck belt for a Craftsman xls 1000 riding lawn mower. [ 2 Answers ]

I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.

Craftsman riding mower problems [ 7 Answers ]

It stalls out going uphill and when I disconnect the gas line and blow in to it it runs fine! I have a feeling it is not getting enough gas flow? I have drained the gas tank and put fresh gas in it, I have replaced the fuel filter too. What else could it be? Should I replace the gas line? Maybe...


View more questions Search