Ask Experts Questions for FREE Help !
Ask
    princesachris's Avatar
    princesachris Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2013, 11:52 PM
    Furnace not getting gas since ignitor was changed
    I had to change a bad ignitor on my coleman evcon furnace and now the ignitor is fine but no longer getting gas so is there a safety reset somewhere I need to reset or what? Everything worked great until I changed the ignitor, and no I'm getting no gas at all it's not the sensing probe not detecting flame
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 24, 2013, 04:17 AM
    Look on the limit switch, if you have a reset it should be located there. Good luck and let us know how it goes. One user, Grady is really good with HVAC questions.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #3

    Dec 24, 2013, 10:17 AM
    Check all the wiring. It is entirely possible when you changed the ignitor, you either bumped a wire loose or forgot to reconnect one. I've done it myself & I do this stuff for a living.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace ignitor [ 1 Answers ]

My Carrier furnace model 58pav will not ignite. When I set it to heat and turn up the temp. the blower only comes on and runs continuously until I turn switch to off. The hot surface igniter does not come on and no gas is emitted. I bhave not removed the igniter but it does not look broken. How...

Luxaire gas furnace ignitor shuts off and blows cold air [ 0 Answers ]

I had a Luxaire gas furnace installed this past August. I have had a problem with this furnace lately. The ignitor comes on and it will blow warm air for about 1 1/2 hours them the ignitor shuts off and the blower will blow cool air for about 30 to 45 minutes. The furnace has to be "reset" it order...

Where to purchase gas furnace ignitor [ 2 Answers ]

Who sell gas furnace ignitors and who or where can I purchase them?

Trane furnace ignitor will not ignite gas for heat, blower will not go off [ 2 Answers ]

I have a Trane unit and the ignitor does not produce a flame. The unit's blower runs and keeps the house at 62 degrees, 29 degrees outside. I have had this same problem once before and I was told that all that was needed was to clean some part in the furnace. Do not remember what that part was. ...

How to change the electronic ignitor on a gas furnace? [ 2 Answers ]

I have a carrier weathermaker series 100, gas furnace. I want to change the ignitor. Where can I find step by step instructions? Thanks, DlSnyder

View more questions Search