Ask Experts Questions for FREE Help !
Ask
    babygrl82's Avatar
    babygrl82 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2013, 12:21 AM
    Help me with my Bryant 340AAV heater
    My heater a Bryant 340AAV started just blowing cold air one day it had a code 13 then 33. We figured out that it was the limit switch that had gone out. It was replaced but with the wrong limit switch. It is supposed to have a L190F-40 but a L160-20F was put on instead. It only worked 1 day. I went to the part store and the right part is an odd part I guess but they sold me a L210F-40 and said it would work fine. The part was put on and still didn't work it is possible it was upside down so it was switched around. Then the thermostat locked up we reset power it was fine but still no heater or fan. It now shows code 24. Does anyone know what to do? Please let me know it is freezing. Thank you
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 7, 2013, 07:55 PM
    Can you please tell us what these various codes mean?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 352aav heater [ 0 Answers ]

My heater won't come on. The a/c works fine and I can use the thermostate to run the fan, but when the temp drops to trip level the fan turns off and then nothing.?

Bryant 340aav Code 24/blown fuses [ 1 Answers ]

Hey, everyone. I am planning to write resumes and I don't know which format of resume could be better for a HR to read? Word? PDF? Or JPEG? Seems Lots of companies now they are using ATS (Applicant Tracking System) to Filter CVs. Most resumes are transferred to the format' txt. 'or maybe some...

Bryant Heater not burning [ 1 Answers ]

Hi... I have a bryant heater approx. 10 yrs old with electric ignition. This morning it was not starting up. I could see the igniter working but no flame. After exercising the gas shut off valve, on the furnace, it eventually fired up. It really didn't sove the problem. It just tempoarily fixed it....

Bryant heater/air conditioner combo, heater does not start [ 1 Answers ]

I have a Bryant heater/air conditioner combo that the heater has stopped working. Here is what happens when I turn it on manually- Smaller fan kicks on I can hear the gas come on for a few short seconds I can hear the igniter trying to ignite It seems like it is not igniting and after a...

Bryant unit heater [ 4 Answers ]

30 year old Bryant unit heater was working yesterday not today. I have 120 volts to the control box, the 732 pilot is still lit. so I bench tested when cold there is no continuity, after heating I have continuity. I do not know what to check next I do not have a wiring schematic. Any sdvise would...

View more questions Search