Ask Experts Questions for FREE Help !
Ask
    bitsnpieces's Avatar
    bitsnpieces Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 6, 2013, 07:42 PM
    Danby Portable Dishwasher DDW1899WP won't start
    Hope someone can tell me what's going on with this new dishwasher. Just purchased it. Filled it with the needed salt and jetdry, hooked it to the faucet, and tried to turn it on. Pressed the start button on left. All the red lights blinked and the unit beeped but that's all. I noticed the green power light did not light up when the rest did. I tried something that was suggested on another site. I pressed the small button to the right of the control knob to reset the memory but still nothing.

    It's a portable Danby (on wheels). Brand new in the box. DDW1899 model. I don't know if it's a switch issue, wiring issue or something else. Seeking advice before I tear the front panel off to investigate.

    Any help is welcomed. Thanks
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Dec 7, 2013, 07:01 AM
    Have you checked the float switch. When they pack it up they put packing material in certain places to keep the parts from moving. You have not removed something or you have low water pressure. The water has to be on and you must have it plugged into a properly grounded receptacle. See: https://dl.dropboxusercontent.com/u/...are_Manual.pdf

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Portable Dishwasher won't run [ 2 Answers ]

I just got a used portable dishwasher off craigslist and it won't run. I got the aerator faucet adaptor for my kitchen and so the connection is fine. However I didn't use plumber's tape the threads or use pliers to tighten it up and so water leaks out the side of the faucet. What happens with...

Portable dishwasher won't take water [ 0 Answers ]

Hey folks, I've had a Maytag portable dishwasher for about a year. Its done a great job until recently. Now when it cycles to take water in, it sometimes just hums and doesn't draw water. It seems to be random when it does this, though its more often than not. It is hooked properly to the faucet....

Sears Kenmore Dishwasher start button won't start unit [ 0 Answers ]

I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...

Portable Dishwasher won't stay on faucet [ 1 Answers ]

Hello... We just got a portable dishwasher for free, which is virtually brand new, but has no manual. We were told it would be easy to hook-up and that it should work with most any faucet. We tried it on our current faucet and it won't stay on. So, we bought a new attachment to the faucet...


View more questions Search