 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Clairtone CL11WW washer
My washer above has a piece that's broken off between the 2 drums inside and you can hear it bouncing around. How do I fix it? I can't find a local place that will fix it as parts are really hard to get-waited 6 months for a part about 6 years ago and I can't find the manufacturer's website to ask them! Help!
|
||||
|
||||
|
I have never heard of that brand, but here is a book to help you: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
If I was you I would get a Whirlpool or Maytag washer. At least you can buy parts for those. I don't see any parts sold for your unit anywhere. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Yellow lines repersent drain pipe,circles represents air vents leading to the roof and green lines represent my suggested drains. One of my options is to add a T-shape coupling where the 90 is form at the bath sink and extend the plumbing an extra 2 feet and form a 90 to lead into the kitchen...
When starting a wash load on my stackable kenmore washer/dryer it starts to fill with water and it clicks. The lights in my house were dimming off and on and the washer sounds like a car trying to start.
The washer will fill and it will agitate for about 10 seconds, then it will stop.When it stops there is no motor sound.Then after about one minute it will start by itself and repeat the same thing over and over no matter what I set the knob to it does the same thing. Could it be the timer?
Brick product, very similar to the current Samsung units sold, clairtone CL11ww apt. size washer, gives no high speed spin. Seems to be draining OK. One day it worked - next it does not, any suggestions?
What couild be causing the drain pipe fro washer to back up and spill all over floor behind washer
View more questions Search
|
