Ask Experts Questions for FREE Help !
Ask
    mcstraycat's Avatar
    mcstraycat Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2013, 03:36 PM
    T8624D Chronotherm Thermostat
    How do you just set this to a simple cooling temp and a simple heating temp. I don't want to do a 7 day program as my hours vary too much.

    Help anyone?

    Thanks in advance.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 9, 2013, 04:03 PM
    There is a "hold" feature. Here's a link to the installation & operation manual. http://www.climatesystems.net/wp-con...notherm-iv.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshoot Honeywell programmable thermostat model T8624D [ 0 Answers ]

I program my Honeywell T8624D no problem that is until it calls for heat then after around 10 minutes the time defaults to a flashing 1:00 and the day changes as if there was a power failure. This happens all the time even though there hasn't been a power failure. The thermostat works well and...

Chronotherm IV plus thermostat [ 0 Answers ]

My thermostat will not shut off. Presently, I have the thermostat set for wake/leave/return and sleep times. Currently, my return time is set for aux heat and I cannot shut it off. I cannot seem to reset to "remove the aux heat to auto fan. Please advise.

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

Honeywell thermostat t8624d [ 1 Answers ]

Hi all I am replacing my old round honeywell thermostat with a t8624d. The wires coming out of the wall are red white green yellow purple (blue). Unfortunately my son disconnected to old one so I have no comparison to go by. My furnace is gas with no air conditioner. Can any one help with the...

Common Wire on Honeywell T8624D Chronotherm [ 1 Answers ]

I'm replacing two White-Rodgers thermostats, one heating and one cooling with a Honeywell T8624D heating/cooling thermostat. I have three wires coming from the cooling thermostat (W, R & G) and 2 wires for heating coming from the transformer located in the wall at the thermostat which are both...

View more questions Search