Ask Experts Questions for FREE Help !
Ask
    arlea1957's Avatar
    arlea1957 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2006, 06:26 AM
    Honeywell thermostat t8624d
    Hi all I am replacing my old round honeywell thermostat with a t8624d. The wires coming out of the wall are red white green yellow purple (blue). Unfortunately my son disconnected to old one so I have no comparison to go by. My furnace is gas with no air conditioner. Can any one help with the wiring of this unit.

    Tnx

    Well it seems I am in further doo doo... lol

    Following the wire leads it appears that only 2 of the wires are connected at the furnace which is a janitrol gun100-4b. Out of the furnace it appears to have only 4 wires that need to be connected. They are red, white, yellow, black and blue (blue appears to be grounded to furnace). Currently the white is to the white at the thermostat and the red from the furnace is attached to the blue at the thermostat. Any Help would be appreciated.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 21, 2006, 03:08 PM
    See the sticky note on the top of the page. It explains what these wires do. Note: installers don't always use the right wire colors so you need to see where these wires go in the furnace to.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell thermostat [ 11 Answers ]

I installed a Honeywell CT87A 4447 thermostat this summer. It worked fine with my air conditioning, but I am having a problem with it controlling my furnace. It will turn the furnace on and I can turn the fan on manually, but when set to auto the fan does not come on. The thermostat has the...

Honeywell Rth7000 Thermostat [ 5 Answers ]

I just bought a honeywell rth7000 thermostat, i am installing in a old house that only uses 2 wires, one is green and the other brown, can anyone advise me how to connect these 2 wires to this unit i am not sure exactly where to connect them to on the honeywell thermostat--thanks

Please Help w/Replacing Honeywell Thermostat... [ 3 Answers ]

Hi! I've just removed my Honeywell Thermostat and am trying to replace it with a Noma programmable tstat... but am having problems with the wiring. There are 5 wires coming out of the wall - Green, Black, Orange, Red and White, and only 4 posts on the Noma tstat (Green, Red, Yellow and White). ...

Honeywell t8624d wiring [ 8 Answers ]

I am trying to replace my old honeywell thermostat with a new Honeywell t8624d Chronotherm IV. My old thermostat is the round turning type. I just want to use my new one for a 1 zone heat in basement. There is a red and white wire coming out of the wall. The red is going to the valve and the white...

Common Wire on Honeywell T8624D Chronotherm [ 1 Answers ]

I'm replacing two White-Rodgers thermostats, one heating and one cooling with a Honeywell T8624D heating/cooling thermostat. I have three wires coming from the cooling thermostat (W, R & G) and 2 wires for heating coming from the transformer located in the wall at the thermostat which are both...

View more questions Search